Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

save dump

Status
Not open for further replies.

BillyA

Technical User
Jun 5, 2003
32
US
trying to id the below problem or problems..
i've tryed to look up error # to no avail.

maybe point me in the right direction..

thanks in advance,

bill


Event Type: Information
Event Source: Save Dump
Event Category: None
Event ID: 1001
Date: 3/13/2005
Time: 7:54:22 AM
User: N/A
Computer: n/a
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0xc1000070, 0x00000002, 0x00000001, 0x804474fe). Microsoft Windows 2000 [v15.2195]. A dump was saved in: C:\WINNT\Minidump\Mini031305-01.dmp.
 
Typically due to a bad driver, or faulty or incompatible hardware or software. Technically, this error condition means that a kernel-mode process or driver tried to access a memory location to which it did not have permission, or at a kernel Interrupt ReQuest Level (IRQL) that was too high. (A kernel-mode process can access only other processes that have an IRQL lower than, or equal to, its own.)

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top