s8700 is not recovering the G650 after a netwrok outage

[dmouge]

I have a s8700 CM3 on 1 site and i have an ESS with g650 in another site... we have some issue with the link and sometimes it goes down unfortunately when the link is up the only solution to recover it is via the command get forced .....

any idea how this can be done automatically?

 

[Dunstan]

On page seven of the cha sys ess translations page there is an option for auto recovery. It is not very flexible...i.e. you set it for a day not for network conditions, however it does work.

 

[irisngen]

is the g650 set up as a gateway? then change sys para mg-recovery rule.

 

[Dunstan]

If it is ESS controlled then mg-recovery rule has nothing to do with it. ESS functions in a different manner and does not follow any of the MG rule sets.

 

[irisngen]

sorry, missed the ess part, i'm only on my first cup of coffee

 

[dmouge]

Hi,

thanks regarding the autorecovery we have try but it is not really succesfull and it is not enough flexible... anyway I guess the solution is to get a stable link.. I hoep the 45 M connection will arrive soon...