S8510 server and SAMP

[wontwork]

Hi,

i am having problems getting my samp working on my S8510 server running 5.2 software, when i test my modem the handshake fails.

Is there any setup that needs to be done in order for the modem to work?

any advise/help apprieciated

cheers,

 

[AvayaTier3]

s8510

http://support.avaya.com/japple/css...eID=348132&temp.bucketID=108025&PAGE=Document

File name - samp-update-AVAYA_S8510_2_2_3.tbz
File size - 11.0 MB (11,562,477 bytes)
MD5 Sum - e4e76e95fee2a781b80fbf3431437447

PSN001939u
s8400A/B, s8500B/C and s8510, s8400

ftp://ftp.avaya.com/incoming/Up1cku9/tsoweb/PSN1939u.pdf

Products affected
Communication Manager (CM), Releases 4.0.3, 5.0, 5.1 and 5.1.1
S8400, S8500-Series Server
Problem description
New SAMP / MPC firmware is necessary to support the new MultiTech MT 9234ZBA-USB
modem (comcode 700451172) for S8400, S8500 and S8510 servers running CM Release
4.0.3 and greater. This new firmware is required with CM 5.1 and greater even
without the new modem. The new modem will not be recognized by the server
without the appropriate SAMP / MPC firmware.

Resolution
- SAMP / MPC firmware applies only to the S8400A/B, S8500B/C and S8510 servers.
The S8400 uses MPC firmware, while the S8500 and S8510 use SAMP firmware
- SAMP / MPC firmware R2.2.3 is available starting June 30, 2008 for use with
CM 5.1 and greater.
- SAMP / MPC firmware R2.2.3 is available starting August 4, 2008 for use with
CM 5.0.
- SAMP / MPC firmware R2.2.3 is available starting August 4, 2008 for use with
CM 4.0.3 and greater.

Version R2.2.3 of the SAMP / MPC firmware supports the new MultiTech
MT9234ZBA-USB modem (comcode 700451172) as well as the previously used MT5634USB
modem (comcode 700405020) but only with the releases indicated above.
For further information about the new modem, including required software and
firmware refer to PSN001938.

pictures of new modems in following document:

ftp://ftp.avaya.com/incoming/Up1cku9/tsoweb/PSN1938u.pdf

Do not upgrade to SAMP / MPC R2.2.3 for CM 4.0.1 and earlier releases.
For more information about SIP Enablement Services and the SAMP firmware refer
to PSN001946.

The R2.2.3 SAMP / MPC firmware can be downloaded from

http://support.avaya.com.

The firmware is located in the Download Center under the appropriate Server
downloads or CM 4.0.x and 5.0/5.1 Release downloads.

Note that there are three different versions of R2.2.3. These versions are
functionally equivalent. The differences are mainly to handle the different
server types. The three versions are:

1. MPC firmware for S8400 A/B.
2. SAMP firmware for S8500 B/C - This is used for the PCI-X SAMP card
(comcode 700405004).
3. SAMP firmware for S8510 - This is used for the PCIe card (comcode 700451198).
Each type of R2.2.3 firmware is uniquely named to differentiate it from the
other types. There are checks in the SAMP firmware and/or CM software to
disallow downloading the wrong type of firmware to the SAMP or MPC.
------------------------------------------------------------
Terminology Comcode Comcode Description MultiTech Product Name
"Old Modem" 700405020 USB MODEM V.92 56K RHS MT5634 USB
"New Modem" 700451172 USB MODEM MT9234ZBA V.92 56K RHS MT9234ZBA-USB


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com