S8500 NFAS with backup

[3000gt]

We are trying to find out what options/features need to be enabled on an S8500 with Com Mgr. 3 to have NFAS with backup (meaning if the primary d-ch goes down a second own takes over).


Expertise in Avaya, Rolm/Siemens, Mitel, Nortel, NEC, Alcatel, Toshiba, Aspect, Ericsson, Executone, Panasonic PBXs & KSUs

 

[mikeydidit]

This is something that you and your service provider will have to work out. They will need to set it up on their end and you will need to change the signaling group to reflect those changes.

It should look like this when you are through.

change signaling-group 1                                        Page   1 of   5
                                SIGNALING GROUP

 Group Number: 1              Group Type: isdn-pri
                    Associated Signaling? n          Max number of NCA TSC: 0
                       Primary D-Channel: 01D2024     Max number of CA TSC: 0
                     Secondary D-Channel: 04D2024  Trunk Group for NCA TSC:
       Trunk Group for Channel Selection: 5       X-Mobility/Wireless Type: NONE
          Supplementary Service Protocol: a          Network Call Transfer? n

         Trunk Brd      Interface ID          Trunk Brd      Interface ID
          1: 02D15            2              11:
          2: 02D04            3              12:
          3: 02D05            4              13:
          4: 02D16            5              14:
          5: 04D17            7              15:
          6: 01C20            6              16:
          7: 01D20            0              17:
          8: 04D20            1              18:
          9: 03C09            8              19:
         10: 03D09            9              20:

You will loose 1 trunk (the 24th member) by making this change.

When is the last time you helped someone, just because you were able to?

For the best response to a question, read faq690-6594

 

[4merAvaya]

No options. When you create the ISDN Signaling Group there is a field 'Associated Signaling? y'. Change that field to 'n' and you can define the Primary and backup D channels.

Kevin