S8300 on G700

[amoosh]

We have a G700 in one of our remote locations and it has an S8300 installed but when i do sh mg list via Telnet it does not list S8300 as an installed module. I am new to G700 so I am not sure if I am missing something. By the way, when I access the G700 via ASA I do not see S8300 in slot V1. I did not configure this location and I am new to this comapny.

Any help is appreciated.

Thank you

 

[amoosh]

We are on CM 6.2.

 

[4merAvaya]

Try doing 'list survivable-processor'.

Kevin

 

[amoosh]

I see the LSP there.

 

[amoosh]

But why doesn't it show when I log in to the G700?

 

[montyzummer]

what command are you typing ????

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[amoosh]

This is the command I use: sh mg list

 

[montyzummer]

try "show module" from the gateway and see what you see.

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[amoosh]

This is a G700 so I only use telnet no SSH. That command does not work. Thanks

 

[Rasreby]

From ASA do list media-gateway. After that you can do cha media-gateway 1 or 2