Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

s8300 installs on CM3

Status
Not open for further replies.
mrjedi

mrjedi

Vendor
Dec 5, 2003
733
NG
Recently I have had problems with several g350s and one g700 installs. Once the base software is loaded. I log into the system. Change the password. save translation and do a reset system 4. This allows me then to add a cabinet. However, under the web browser, the processes is showing 65/67 partially up for communication manager and it won't register the gateways. Anyone had this problem ?
 
Sort by date Sort by votes
yes- all that was done - but i left the system for 2 hours and its all working. Very annoying that you have to wait almost 2 hours for the system processes to come up.
 
Upvote 0 Downvote
Prior to adding the media gateway, enter command 'change ip-interface procr' and enable ethernet port.
This should register the G350/G700 gateway.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Joey Humphrey
  • Locked
  • Question
Button labels disappearing on add on modules BM12
Replies
5
Views
372
Joey Humphrey
Joey Humphrey
trilogy8
  • Locked
  • Question
Update IP Address on LSP s8300 (AVP, CM)
Replies
2
Views
605
Sean655
S
BIS
  • Question
Help me check a file on CMS 20, 21
Replies
4
Views
203
BIS
BIS
km9v
  • Locked
  • Question
New users stuck on acquiring service J159
Replies
0
Views
254
km9v
km9v
Krul72
  • Locked
  • Question
Avaya G450 S8300 Failure
Replies
12
Views
806
Krul72
Krul72

Part and Inventory Search

Sponsor

Back
Top