Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

s-bus on a module help

Status
Not open for further replies.
tony7966

tony7966

Technical User
May 7, 2003
1
GB
hi i have a moduar system with 2 isdn30 cards in the ksu, i am trying to pull out an isdn 2 s bus on a line module.
i seem to get the card synchronied buti am having trouble with the connections to my terminal adaptor. any help would be apreciated.

regards

Tony
 
Status
Not open for further replies.

Similar threads

T
  • Locked
  • Question
Norstar help
Replies
14
Views
1K
curlycord
curlycord
S
  • Question
Help with Nortel CICS : Do I have CLID?
Replies
4
Views
99
MooreTel
MooreTel
Stephen Smith
  • Locked
  • Question
Help Troubleshooting Nortel CICS Noise on all Phones - swap positions of trunk cards
Replies
2
Views
631
curlycord
curlycord
P
  • Locked
  • Question
Incoming calls go to dial tone on Nortel MICS-XC 7.0
Replies
11
Views
1K
curlycord
curlycord
icmpflood
  • Locked
  • Question
Copper to Fiber switch on Nortel ICS /appr&ring on/in-calls neither appearing or ringing on hand 2
Replies
6
Views
709
Tele-tech
Tele-tech

Part and Inventory Search

Sponsor

Back
Top