Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Router config

Status
Not open for further replies.

bobo0605

MIS
Joined
Dec 4, 2003
Messages
71
Location
US
Hello all,

I have a problem that I hope can be resolved. To give a liitle history. I have two sites that are connected together by a T1 line. The connection to the internet is a half T1. The internet has a central location that both sites connect to. We are moving to a wirless internet access solution at both sites. This means that both sites will have independant internet access points. We are keeping the T1 connection between both sites. is there a way to configure the router at one location to transfer all to a certain ip address.
 
not sure what your getting at?

If you have a central proxy server, just be sure your PC's have the correct gateway IP. You can configure your router to forward all IP to a certain address (or certain router), but I'm not sure about just (port 80).

We have 3 T1's where I work with 2 locations. Each location has its own internet access T1, but we have a PTP T1 circuit for our server and phone traffic between sites.

If you're looking to maintain control over for two locations through one router, I'd advise against it since you'll be flooding your network with excess bandwidth from site to site. I'd setup a proxy at each location and remote admin one with termianl services.
 
you may also want to thik about BGP. I am not sure it will work as I am still a little unclear what you are trying to do.



commsguy

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top