Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ROLM 9751 MOD 10 HARDWARE ISSUES

Status
Not open for further replies.

joeb5110

Technical User
May 8, 2009
42
0
0
US
Is there anyone left besides me that supports these systems? Rolm doesn't have its own forum, I hijacked the Siemens one.
I can't log in to a pbx. I've seen this error over the years but don't remember the solution.
PASSWORD:
INVALID OS return code (1817)

This system seems to be dying a slow death. Two days ago it was giving me a message "CPU Lacks Updates".
I thought that was only on redundant systems (which Mod 10 isn't).
At that time I was at least able to log in. LI HD showed "volume not found". The error table also showed
a bad power supply, but the phones are live, how could that be?
I'm tempted to ask a tech to hit the silver bullet, or initiate a restart from the PDC card, but am afraid to risk the system
not restarting at all. At least it's running off its memory.

Last attemtpt to log in today:
USERNAME:
ATTEMPTING TO MOUNT THE 'DIAG' VOLUME.
ERROR: CANNOT READ HDIPL FROM DISK.

MOUNT FLOPPY ERROR: Volume not found

MOUNT FLOPPY ERROR: Volume not found
 
Unfortunately it could be a bad hard drive, or if fortunate a restart would resolve it. It first looks for CNFG on he hard drive, then the diskette drive. Like you said, a restart may do worse than not fixing the situation.

I think I've seen the power supply error when the memory backup battery is bad. That is quite strange is saying the CPU lacks updates, I also thought that's only on a redundant system if when the standby side wasn't updated.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top