RIP V2

[drbk563]

Does RIP V2 support VLSM by default and if so is it enabled by default?

Thank You ;-)

 

[leedsit]

I believe so as RIP V2 carries the Subnet mask in the advertisement. As long as your running V2 and ip classless all should be ok.



LEEroy
MCNE6,CCNP,CWNA,CCSA,Project+

 

[drbk563]

So I do not have to enter "no auto-summary" in router config mode?

 

[leedsit]

Hi,

Blimey... just had to get the book out, could not remember... looks by default v2 does summarize on the boundaries, so your quite right, no auto-summary is also needed.

HTH... Lee

LEEroy
MCNE6,CCNP,CWNA,CCSA,Project+

 

[drbk563]

Thank You for your help.

 

[DanInRaleigh]

..a also think you have to do this..

conf t
router rip
ver 2
....you have to specifiy version 2...

http://www.daniel-white.com