Ringing Cycles does not work with RCY1 set in CDB

[jadiebear]

Under MPO_DATA I set RCY1 to 6 in CDB and set RCO in the set to 1 but only get 2 rings before is forwarded to DN set in FDN? It still ring 2 times before forwarding even though I set RGNA to either AAR AAR or STD STD.

WHen I change RCO of the set to 2, it rings 3 times before it forwards even though I set RCY2 to 10.

It seems to me RCY1 and RCY2 never work regardless what value you set. I thought RGNA in CDB and RCO in TNB of the set control that but it does not. Any advice?

THanks

 

[GHTROUT]

You probably don't want to be using RCY - you probably want to be using CFN and DFN in the RDR_DATA block.

Here is an example of RCO on a TN and how it relates to CFN/DFN -

http://www.ghtrout.com/rdr/rco.html

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[jadiebear]

Thanks GHTROUT

You're correct. CFN works. Just curiosity, when do we need to use RCY, the description in NTP is not clear.

Thanks again

 

[GHTROUT]

I know, it's not that clear. I've never used it, but I believe it is related to "Recovery of Misoperation during Call Transfer" - a feature I never had a use for. It might be one of those features that is more common off-shore than in the US

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators