I had unchecked all of the default Display, Menus, Shortcut Menu, Allow Built-in Toolbars, and Allow Toolbar Changes options using the Tools > Startup... window tool of Access 2000. The problem I have is that I would like to reverse those uncheckings and put the databse back to how it normally startups > showing the Databse Window and all the other Menu and shortcut options. Please advise how to fix this.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Reversing Acess 2000 Startup options 1
- Thread starter ferindojr
- Start date
-
1
- #2
Hi!
If you hold down the shift key while opening the Db then Access will bypass all of those start up options. You will then have full menus and you can go back into the start up options and change what you want.
hth
Jeff Bridgham
bridgham@purdue.edu
If you hold down the shift key while opening the Db then Access will bypass all of those start up options. You will then have full menus and you can go back into the start up options and change what you want.
hth
Jeff Bridgham
bridgham@purdue.edu
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question