Restricting certain numbers from a route

[kevinpooran]

Hello,

I would like to restrict certain area codes when a route is accessed.

The route i am using has an ACOD of 78.

Example of what i want ot accomplish.Once the route is used the user,
Can dial 1-312-XXX-XXXX
Can not dial 1-868-XXX-XXXX

 

[KCFLHRC]

Go into LD 20 and do a DNB on 9, my guess is 9 is BARS/AC1, not the ACOD to route 209

 

[kevinpooran]

NARS AC1

 

[KCFLHRC]

This wont work through BARS/AC1. It's for direct trunk access only.

 

[kevinpooran]

What are my options ?

To have no call to the US go over my T1 route (9).

But if a call is place using 9 to the US it automically routes over route 226.

 

[KCFLHRC]

You will need to make a separate entry in BARS for the US Country Code and then send it to an RLI with a higher FRL than your phones. This gets really complicated if you have no experience doing it. You may have to break out all International Country Codes to do what you are wanting. It also may be as simple as denying the US code in your RLI, however, not knowing how your programming is done that is only a guess. Some people short cut BASRS By just putting in 011 here in the USD. That routes any International Call to that RLI. In your case you want to break out a country code so you will have to break every country code to do this possibly.

 

[kevinpooran]

yikes