Resources

[cgzz]

Hi, was trying to make one outbound call and goes trought my trunk 34, this is the trace log i get

time data

11:29:02 G711MU ssff ps:20 rn:1/1 172.16.30.210:2658 172.16.81.31:2800
11:29:06 dial 90018009523675
11:29:06 busy trunk-group 34 cid 0x3610
11:29:06 denial event 2314: No channel resources D1=0x7f00004d D2=0x3610
11:29:24 idle station 1123 cid 0x3610

for more info, it is on port-network 8 and we have the following


08A
Cabinet 8 Carrier A

SLOT CODE SF NAME
1
2 TN2312 IP SERVER INTFC
3 TN2464 B DS1 INTERFACE
4 TN2464 B DS1 INTERFACE
5 TN2464 B DS1 INTERFACE
6 TN744 E CALL CLASSIFIER
7 TN2464 B DS1 INTERFACE
8 TN2464 B DS1 INTERFACE
9
10 TN2302 IP MEDIA PROCESSOR

I am thinking that is because of the DSP resources, what you guys think?
thanks

 

[colby007]

Have you assigned any channels from a DS1 board in trunk group 34? What is the status of the trunk?

 

[cgzz]

the status is up and running i have traffic on the trunk
and yes, all the channels are assigned on the 34 trunk
it is an isdn trunk and we are using commpression between regions when using this trunk

 

[4merAvaya]

There appear to be no spare channels available. If you do 'li measurement trunk-group summary last' does it show all ports being used? Is there an overflow trunk group in the route pattern?

Kevin

 

[cgzz]

can someone tell me where can i find more information about what this mean? is for the command
list measurements ip dsp-resource hourly 1
thanks


Meas
Hour

Region

DSP
Rscs

DSP Usage
(Erl)

In Reg
Peg

Out of
Reg Peg

Denied
Peg

%
Blk

% Out
of Srv