Resources not available

[telcoguy]

Anyone got an idea about this one:

I got one of my switches telling me "Resources not available " whenever I try to log on.
I get no proper login prompt from any of the ports; serial,IP,or INADS.
My dial-up INADS port is stuck and does not show anything at all.
According to the Avaya documention it looks like a lockup of the software but releasing requires a working terminal.
We have rebooted this system twice hoping it would come out of it,but with no result, it just jumps back into its stuck loop.
System data:It is a Definity SI, R009i.05.x.x single CPU, with C-LAn and Medpro.
The system seems fine otherwise,even after a reboot,all funtionality phonewise is there, I only cannot get access to it anymore..


Thanks
Rob

 

[petran]

Hello,

Try replacing the processor board and Net/con & Pkt-intf boards, if possible. It is either an SPE hardware problem or a software problem. In both cases replacing these boards will solve it..



Petran.