Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Report memo field question

Status
Not open for further replies.
Joined
Jan 28, 2004
Messages
2
Location
US
I created a memo field (I use Paradox version 8) and on the form it looks fine, but when I created a report, at the end of every other line there is "" symbol, and I don't know how to delete it? Any help would be appreciated

James
 
Is this from an answer table or not? Is the field in a MRO (Multi-Record Object)? If not, is it labeled or edit?
 
1. No. The data is from a table not a query
2. Yes it is a MRO.

thanx

James
 
Tried to duplicate, could not. Went into 8, created a report with a MRO and a memo field in it. Printed out fine. Tried setting the field as breakable and unbreadable. Fit the height on and off also.

You might try creating a simple report from that table. Or you could run a query of the table and open the report to that answer table. If so, make sure that the table isn't corrupted.

I have also gotten some strange results when you put reports together and the key field(s) are not on the report.

Sorry I couldn't be more help.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top