Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Replacing XSM card 1

Status
Not open for further replies.
ntsam21

ntsam21

Vendor
Joined
Mar 30, 2007
Messages
25
Location
GB
Hi,

Can somebody help me with the procedure to replace the XSM cards from and Option 81C switch.

Thanks in advance

 
Sort by date Sort by votes
part number?

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
Generally just dis TTY 0 then unplug cables from XSM then remove. Set the dip switches on the new card. Insert card, cable back up and enable TTY 0. The TTY bit is not needed for all the XSMs (Depending which column) but can't harm.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

brison
  • Locked
  • Question Question
OPX card test
Replies
1
Views
185
gbtac3
gbtac3
G
  • Locked
  • Question Question
Remove PRI card
Replies
6
Views
750
telekon7
telekon7
Everest67
  • Locked
  • Question Question
ENET card CS1000M
Replies
6
Views
733
Firebird Scrambler
Firebird Scrambler
lexer
  • Locked
  • Question Question
Tandem trunking on E1 Card
Replies
9
Views
1K
lexer
lexer
LidLock Technologies
  • Locked
  • Question Question
Option 11 Universal Trunk Card Pinout
Replies
2
Views
638
SoftwareRT
SoftwareRT

Part and Inventory Search

Sponsor

Back
Top