Replacing 2302ap with a 2602ap

[tsekreta]

Hi,

I am replacing a TN2302ap MedPro with a TN2602ap MedPro. I presently have two TN2302's now and will be replacing just one with the TN2602, will keep the other.

Can I just swap boards in the gateway or do I need to do something else? Please advise.
CM 5.1 650mg.

Thank you,
BT

 

[Mitch672]

change ip-interface 01AXX", (use whatever slot your TN2302AP is in)
stroke "enabled" to N, press enter
"remove ip-interface 01AXX" (remove the MEDPRO programing now)

now physically remove the card (and the rear dongle on the G650), insert the new TN2602AP dongle on the rear, and insert the card.

now reverse the above:

"add ip-interface 01AXX"

ok?



Mitch

AVAYA Certified Expert

 

[tsekreta]

Mitch,

Awesome.

Thanks,
BT

 

[4merAvaya]

The PBX has to be at lease a CM 3.x to use the TN2602 Crossfire board.

Kevin

 

[Mitch672]

4merAvaya, switch is at CM 5.1 per tsekreta's first post


Mitch

AVAYA Certified Expert