Replace DS card on Module 7

[Nortellian]

I have a MICS 7.1. I want to replace a DS card in slot 1 on module 7. Can I just disable card 1 on module 7 in maintenance and replace the card? Can do this during normal business hours? Thanks.

 

[cook1082]

I have done it with no problem.

 

[bigcat919]

I have done the same thing during the day but I always pull the power plug on that module just to make sure nothing happens that I don't want to happen, then power back up. whole process should take approx. 5 minutes.

 

[Runako]

If I were you I would defiantly power down the 12x0 before removing or adding a card to be on the safe side.

 

[Nortellian]

Disabled module 7, pulled power, changed card, repowered, no problems. Thanks.