Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Removeing off-pbx station

Status
Not open for further replies.

NewNic

IS-IT--Management
Nov 14, 2003
525
US
I have several Off pbx stations mapping defined as ops for the application. I can not figure out how to change the trk grp or how to remove. Change does not seem to do it.

Thanks for any help
 
If they are administered as stations, just do 'remove station x'.

Kevin
 
Code:
list off-pbx-telephone station-mapping                                 Page   1

                    STATION TO OFF-PBX TELEPHONE MAPPING

Station    Appl   Phone Number      Config  Trunk       Mapping      Calls
Extension                           Set     Selection   Mode         Allowed

5011       OPS    5011              1 /     1           both         all
5012       OPS    5012              1 /     1           both         all
5013       OPS    5013              1 /     1           both         all

Blank out the entries and submit

change off-pbx-telephone station-mapping 5011                   Page   1 of   2
                  STATIONS WITH OFF-PBX TELEPHONE INTEGRATION

 Station     Application   Dial   Phone Number      Trunk       Configuration
 Extension                 Prefix                   Selection   Set
                                -


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

39 years Bell, AT&T, Lucent, Avaya
Tier 3 for 29 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Ya, found it, i found that these were built as sip stations, had to modify the tg in the station form, thanks for the responce
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top