ringbacktone
Technical User
I have a customer that wants to add an 0x16 module. The only place left to add it is in fiber port 7, which now has a trunk module installed.
Plan is to move the 1 co line that resides on trunk mod to the main cabinet. Then I plan on disabling module, un plug it, then mount 0x16 and go to hardware and chg it from trunk module to station module .
I do not really see any issue with this method, but it is a 4.0 software release, so anything is possible.
The question is ,does anyone on the forum have any recent expierence
with this application on software this old ?
Thanks in advance,
RBT
Plan is to move the 1 co line that resides on trunk mod to the main cabinet. Then I plan on disabling module, un plug it, then mount 0x16 and go to hardware and chg it from trunk module to station module .
I do not really see any issue with this method, but it is a 4.0 software release, so anything is possible.
The question is ,does anyone on the forum have any recent expierence
with this application on software this old ?
Thanks in advance,
RBT
