Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Remote Text/Email Notification in Call Pilot 4 3
- Thread starter AOSupport
- Start date
- Thread starter
- #21
Have you verified that all of your IP settings on the server are correct? DNS, WINS, etc?
I just checked some things on my R5 server, and I don't see anything that really stands out.
From your description, it sounds like the notifications are being sent when the server boots, and then additional notifications are queued and never sent.
I would definitely think about calling support on this one.
I just checked some things on my R5 server, and I don't see anything that really stands out.
From your description, it sounds like the notifications are being sent when the server boots, and then additional notifications are queued and never sent.
I would definitely think about calling support on this one.
strmwalker
Technical User
AOSupport..can you list all the peps you have installed?
and post them.
no problems only solutions
strmwalker
and post them.
no problems only solutions
strmwalker
allenmac,
Thanks for the above info, it helped me to get this feature up and running. My question is that you said earlier that you were able to manipulate the caller ID so that it could be dialed directly from a Blackberry. How/Where did you do this?
J
Thanks for the above info, it helped me to get this feature up and running. My question is that you said earlier that you were able to manipulate the caller ID so that it could be dialed directly from a Blackberry. How/Where did you do this?
J
From the Callpilot manager:
Note: all values assume your are in the US.
Click on Messaging -> Dialing Information
In the Dialing Defaults section:
enter 1 in the Long Distance Prefix field, 011 in the International prefix field. Leave the local prefix and ESN Access code fields blank.
In the Public Telephone Network section:
enter 1 in the Local country code field. Leave the Local area/city code blank.
You can play around with the options in the Unknown Format Handling section, and see what works for your particular situation.
Note: all values assume your are in the US.
Click on Messaging -> Dialing Information
In the Dialing Defaults section:
enter 1 in the Long Distance Prefix field, 011 in the International prefix field. Leave the local prefix and ESN Access code fields blank.
In the Public Telephone Network section:
enter 1 in the Local country code field. Leave the Local area/city code blank.
You can play around with the options in the Unknown Format Handling section, and see what works for your particular situation.
- Status
Similar threads
