Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Remote H.323 woes...

Status
Not open for further replies.

thrtnastrx

Technical User
Oct 31, 2002
276
US
Have an IPO R8.0.43 behind TrendNET router, 1719-1720 opened, RTP ports opened, port restricted cone NAT, phone is very close to registering but it keeps unregistering too. Enable remote worker is checked, license is valid, allow remote extension is checked. Here are the H.323 messages from Monitor:

600784219mS RasRx: v=IFace=LAN2, Src=XXX.60.174.28:49300, Dst=192.168.0.10:1719 peb=0
RasMessage = gatekeeperRequest

600784220mS H323Evt: Recv GRQ from 403cae1c
600784220mS H323Evt: e_H225_AliasAddress_dialedDigits alias
600784220mS H323Evt: found number <225>
600784221mS RasTx: v=Src=192.168.0.10:1719, Dst=XXX.60.174.28:49300 peb=0
RasMessage = gatekeeperConfirm

600784274mS RasRx: v=IFace=LAN2, Src=XXX.60.174.28:49300, Dst=192.168.0.10:1719 peb=0
RasMessage = registrationRequest

600784275mS H323Evt: Recv: RegistrationRequest XXX.60.174.28; Endpoints registered: 0; Endpoints in registration: 1
600784275mS H323Evt: e_H225_AliasAddress_dialedDigits alias
600784275mS H323Evt: found number <225>
600784275mS H323Evt: RRQ --- CallSigProtocol is H323AnnexL_P. Go for Avaya 4600IP phone
600784276mS H323Evt: RRQ --- Treat this as a forced login, the phone was probably rebooted (same_cs_addr 0)
600784276mS H323Evt: GK: Unregister endpoint Lunzers 28932_50211a2842e5140e for extension 225
600784277mS H323Evt: GK: Send URQ
600784278mS RasTx: v=Src=192.168.0.10:1719, Dst=XXX.60.174.28:49301 peb=0
RasMessage = unregistrationRequest

600784278mS H323Evt: RRQ --- Register extn 225 using product IP_Phone, version 3.103S
600784278mS H323Evt: <225> registered, ipo behind nat 1, phone behind nat 0
600784280mS RasTx: v=Src=192.168.0.10:1719, Dst=XXX.60.174.28:49300 peb=0
RasMessage = registrationConfirm

600795839mS RasRx: v=IFace=LAN2, Src=XXX.60.174.28:49301, Dst=192.168.0.10:1719 peb=0
RasMessage = gatekeeperRequest

600795839mS H323Evt: Recv GRQ from 403cae1c
600795840mS H323Evt: e_H225_AliasAddress_dialedDigits alias
600795840mS H323Evt: found number <225>
600795840mS RasTx: v=Src=192.168.0.10:1719, Dst=XXX.60.174.28:49301 peb=0
RasMessage = gatekeeperConfirm

600795879mS RasRx: v=IFace=LAN2, Src=XXX.60.174.28:49301, Dst=192.168.0.10:1719 peb=0
RasMessage = registrationRequest

600795880mS H323Evt: Recv: RegistrationRequest XXX.60.174.28; Endpoints registered: 0; Endpoints in registration: 1
600795880mS H323Evt: e_H225_AliasAddress_dialedDigits alias
600795880mS H323Evt: found number <225>
600795881mS H323Evt: RRQ --- CallSigProtocol is H323AnnexL_P. Go for Avaya 4600IP phone
600795881mS H323Evt: RRQ --- Treat this as a forced login, the phone was probably rebooted (same_cs_addr 0)
600795881mS H323Evt: GK: Unregister endpoint Lunzers 28932_50211a7657ea2451 for extension 225
600795882mS H323Evt: GK: Send URQ
600795883mS RasTx: v=Src=192.168.0.10:1719, Dst=XXX.60.174.28:49300 peb=0
RasMessage = unregistrationRequest

600795883mS H323Evt: RRQ --- Register extn 225 using product IP_Phone, version 3.103S
600795883mS H323Evt: <225> registered, ipo behind nat 1, phone behind nat 0
600795885mS RasTx: v=Src=192.168.0.10:1719, Dst=XXX.60.174.28:49301 peb=0
RasMessage = registrationConfirm

600801183mS H323Evt: IRCheckTimer: GRQ record deleted (user name=; extn-num=225)
600801183mS H323Evt: IRCheckTimer: GRQ record deleted (user name=; extn-num=225)
600801183mS H323Evt: IRCheckTimer: GRQ record deleted (user name=; extn-num=225)
600801183mS H323Evt: IRCheckTimer: GRQ record deleted (user name=; extn-num=225)
600801183mS H323Evt: IRCheckTimer: GRQ record deleted (user name=; extn-num=225)
600807480mS RasRx: v=IFace=LAN2, Src=XXX.60.174.28:49302, Dst=192.168.0.10:1719 peb=0
RasMessage = gatekeeperRequest




APSS - ACIS - ACSS
 
Nevermind, should have looked at my firewall logs first. Had 1720 programmed as UDP accidentally.


APSS - ACIS - ACSS
 
What i see is that extension 225 is first unregistered and then it tries to register.
Are you sure that you have a unique extension?

BAZINGA!

I'm not insane, my mother had me tested!

 
It came up as soon as I changed the H.323 service for port 1720 from TCP to UDP.


APSS - ACIS - ACSS
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top