Remote Desktop Logon Same for All Systems

[michaelfaulkner]

If I use Remote Desktop Connection on one system to logon to an IP address, this IP address will show up as the initial default for every computer on the network**. This is when Remote Desktop Connection has never been used on that other workstation. I'm running under Active Directory. These are cloned system with Ghostwalk/SID change applied.

**It's been about nine months since I had this service turned on so my memory is a bit weak, but in the scenario above, it is either the user name or computer that gets propagated to the RDC interface to all systems in my OU.

 

[tfg13]

Do you have roaming profiles enabled?

 

[michaelfaulkner]

No. Local only.

 

[michaelfaulkner]

....although the default profile was from the same computer as it was Ghosted. I did not use Remote Desktop Connection while setting up the Ghost, however.

 

[tfg13]

You are stating that the Ghost image PC does have RDC on that PC, and that it was not configured (on the original machine)?