Remote Client to Pix 515E VPN

[shik]

We are attempting to set up our Pix so that remote users can VPN in using the VPN client. As far as we can tell we have set it up properly. When we attempt to login through the client it authenticats fine. However it will not connect to the domain server, and we are unable to connect to any of the comptuers inside the network.

What are possible causes of this?

 

[criticalUpdate]

can you ping the server if you can then IP is working through the VPN. Then you need be sure that your DNS is working. when you say Domain are you talking w2k or nt4

Jeff

 

[andf1]

Is the client receiving the correct IP address assignment from your PIX? What happens when you PING hosts on the inside network?

It would be best if you post your configuration after masking confidential information.

Andy

 

[shik]

The Domain is NT4.

And yes i can ping inside addresses. I can also ping the remote client from inside with the address it was assigned by the pix.

I acctually had it working briefly this morning, but now its tell me that it is unable to find/access the domain.