Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Remote 900 codes

Status
Not open for further replies.

silver987

Vendor
Sep 22, 2004
1,409
US
The system will not let me program any 900 codes remotely, anyone know a way around??

Wayne T
 
What do you mean remotely?

Can the users on site do it using the normal F*3 method?


________________________________________

Add me to LinkedIN

small-logo-sig.png

=----(((((((((()----=
Toronto, CAN
 
If I dial in and try to use Remote tool set the buttons won't accept any 900 codes. They will accept all other codes, just not like F981.

Wayne T
 
You would also have this issue when on site using Config.
I think according to the KSU 900 codes are not fully it's data base as they belong to the voice mail system.
You would need to program them in person at the set level (Feature * 3), once that is done you can then do a set copy remotely.

BCM however is more integrated with Callpilot and allows to program the vmails codes via admin programming.


________________________________________

Add me to LinkedIN

small-logo-sig.png

=----(((((((((()----=
Toronto, CAN
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top