Rel 6 Linux server Base manager

[Jeffnortel]

What type patches are installed from the Base manager window?

I downloaded the deplist for Linux off the espl and tried installing them from Base manager patches screen and an error came back and said "wrong file type".

I was able to install that same file/deplist when I logged into the Unified Communications page.

Just wondering what patches are installed on the Base manager page.

 

[Firebird Scrambler]

I thought it was the CS1000 Rls 6.0 Linux Service Pack Tool
that was required with a file extension of *.ntl?. I've not done this before, but on the PEP site, I can see a total of 18 patches available.

Is this the correct area to be in as I had selected the second box down in PEP Dependency Tools.

Otherwise the only other area would be in the box above but I was unable to obtain any patches when I looked.


All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[Jeffnortel]

Correct, that's exactly where I downloaded them, second button down under pep dep tools.

You can't load the .ntl file in Base manager only in Unified Comm page.

 

[M1tel]

Base manager is used to review the patching details in a target server only

 

[Jeffnortel]

What do you mean by "review"?

 

[M1tel]

I will give patch name any details and special instructions as well as the status of the patchs