Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

registry hive missing or corrupt

Status
Not open for further replies.

jwjhnsn

Instructor
Jul 29, 2003
42
US
got an error

The registry cannot load hive (file): \SystemRoot/System32\Config\SOFTWARE or its log or alternate. It is corrupt, absent, or not writable.

Beginning dump of physical memory

help !!!!!!!!!
 
jw:

An easier fix to try first is to have Windows XP boot to the Last Known Good Configuration.

Microsoft describes this boot option thus:

"The Last Known Good Configuration feature is a recovery option that you can use to start your computer by using the most recent settings that worked. The Last Known Good Configuration feature restores registry information and driver settings that were in effect the last time the computer started successfully. Use the Last Known Good Configuration feature when you cannot start Windows XP after you make a change to your computer, or when you suspect that a change that you just made may cause a problem. For example, you can use this feature if you cannot start Windows XP after you install a new driver for your video adapter, or if you installed an incorrect driver and have not yet restarted your computer."

The instructions are at this link:


If that doesn't work, bcastner's suggestion is your best bet.

Regards,
Doc

======================================
"Freely you have received, freely give." --Jesus
pcdoc4christ@yahoo.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top