Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

register kx-ns0154

Status
Not open for further replies.

ingy500

Programmer
Oct 8, 2014
191
JO
hi all

i have 3 cell station kx-ns0154
12 Handset KX-TCA185

how register to ns500 version 8.. step by step

Ican register all master cell station
or 1 master.. and-2 slave
I have an area of 120 meters



Greetings to all
 
hi kizo

unclear explanation
Is there a standard installation


DIP SW No 1to 8?
 
For safer operation it is better to put CS on fixed IP address (of course in range like a PBX)
Follow the instructions:
page 18 to 21
SW 7 to ON, connect to CS (default AP address 192.168.2.101 ), change IP address, write to CS,power of, SW7 to 0, connect CS to network.
page 28 to 31
Register CS to PBX

Other SW is for diagnosis or site survey
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top