I've been tasked with consolidating / reducing the port count in my customers PBX. Also line cards must be removed from the switch since the customer pays by the port/card. It is unacceptable to them to simply out unused TN's.
As I move TN's and free up cards: example I have .DISC 4 0 3. However if I stat the card in LD 32 it is still showing units as UNEQ vs CARD UNEQ as 4 0 4 shows. I have physically removed card 4 0 3 from the chassis
How do I get the slot to display CARD UNEQ?
.STAT 4 0 3
00 = UNIT 00 = UNEQ
01 = UNIT 01 = UNEQ
02 = UNIT 02 = UNEQ
03 = UNIT 03 = UNEQ
04 = UNIT 04 = UNEQ
05 = UNIT 05 = UNEQ
06 = UNIT 06 = UNEQ
07 = UNIT 07 = UNEQ
08 = UNIT 08 = UNEQ
09 = UNIT 09 = UNEQ
10 = UNIT 10 = UNEQ
11 = UNIT 11 = UNEQ
12 = UNIT 12 = UNEQ
13 = UNIT 13 = UNEQ
14 = UNIT 14 = UNEQ
15 = UNIT 15 = UNEQ
16 = UNIT 16 = UNEQ
17 = UNIT 17 = UNEQ
18 = UNIT 18 = UNEQ
19 = UNIT 19 = UNEQ
20 = UNIT 20 = UNEQ
21 = UNIT 21 = UNEQ
22 = UNIT 22 = UNEQ
23 = UNIT 23 = UNEQ
24 = UNIT 24 = UNEQ
25 = UNIT 25 = UNEQ
26 = UNIT 26 = UNEQ
27 = UNIT 27 = UNEQ
28 = UNIT 28 = UNEQ
29 = UNIT 29 = UNEQ
30 = UNIT 30 = UNEQ
31 = UNIT 31 = UNEQ
.
AUD000 STAT 4 0 4
CARD UNEQ
.
