Dec 22, 2003 #1 mufka ISP Dec 18, 2000 587 US My redhat 9 box is dropping off the network often and on the console is the message "eth0: PCI bus error, bus status 80000020"
My redhat 9 box is dropping off the network often and on the console is the message "eth0: PCI bus error, bus status 80000020"
Dec 22, 2003 #2 thedaver IS-IT--Management Jul 12, 2001 2,741 US Could be: 1) Bad wire, 2) Bad NIC, 3) IRQ conflict if you've got a lot of PCI devs in place 4) Bad port/hub Try replacing elements of the equation and see if things stabilize. Surfinbox.com Business Internet Services - National Dialup, DSL, T-1 and more. http://www.surfinbox.com/business/ Upvote 0 Downvote
Could be: 1) Bad wire, 2) Bad NIC, 3) IRQ conflict if you've got a lot of PCI devs in place 4) Bad port/hub Try replacing elements of the equation and see if things stabilize. Surfinbox.com Business Internet Services - National Dialup, DSL, T-1 and more. http://www.surfinbox.com/business/
Dec 23, 2003 #3 mrunix IS-IT--Management May 15, 2001 36 US are you using a redhat supported card? if there's one thing i have learned, using redhat-stated supported devices makes a big difference. http://hardware.redhat.com/hcl/ check this link, and if you have to switch to one of the listed ethernet cards, by all means do so and save the headaches. Upvote 0 Downvote
are you using a redhat supported card? if there's one thing i have learned, using redhat-stated supported devices makes a big difference. http://hardware.redhat.com/hcl/ check this link, and if you have to switch to one of the listed ethernet cards, by all means do so and save the headaches.