PAULNOTTRACEY
Technical User
Hi we have a Meridian 81c and have just been upgraded to Release 3 software.
Will the RLC work or do i need to get it upgraded?
Many Thanks
Paul
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Reach Line Card and Succession 3 software
- Thread starter PAULNOTTRACEY
- Start date
- Status
Hi we have a Meridian 81c and have just been upgraded to Release 3 software.
Will the RLC work or do i need to get it upgraded?
Many Thanks
Paul
If you have rel 1.4 on the rlc and 9150 it should be fine.
I just have a rel 4 document here and it talska about 1.4 as the lowest release for cs1000 rel 4, so it should be sufficent for rel 3 also.
Its working to rel 25 also.
If you have an older release its advisable to upgrade it.
Its not so expensive.
And you will get a much more reliable system.
I just have a rel 4 document here and it talska about 1.4 as the lowest release for cs1000 rel 4, so it should be sufficent for rel 3 also.
Its working to rel 25 also.
If you have an older release its advisable to upgrade it.
Its not so expensive.
And you will get a much more reliable system.
- Status
