Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

RDP via DG814 and CUBE3 and DMZ

Status
Not open for further replies.
mrliam69

mrliam69

Programmer
Jul 21, 2003
75
GB
I wonder if someone could help me or point me iin the right direction

I have a DSL account with 8 public IP's

I have my DG814 router connected to the Internet and passed straight onto the CUBE3 which is set as a DMZ by the DG814...

The Cube has its Eth1: port set to a public IP and its eth0: set to the LAN.

Now I need it to connect to the W2K server so I can RDC to it and that is where I am getting stuck. No amount of PORT forwarding 3389 can get me to the server......
 
Status
Not open for further replies.

Similar threads

Dave60608
  • Locked
  • Question
Accessing shared folders via a network
Replies
5
Views
685
strongm
strongm
bechna
  • Locked
  • Question
Windows Server and VPN Setup
Replies
1
Views
338
DrB0b
DrB0b
tviman
  • Locked
  • Question
How to restrict RDP users to the desktop 2
Replies
13
Views
678
strongm
strongm
DrB0b
  • Locked
  • Question
Terminal Server issues doing anything network related after RDPing into
Replies
3
Views
362
DrB0b
DrB0b
geneg28
  • Locked
  • Question
Active Directory and Linux Servers
Replies
0
Views
210
geneg28
geneg28

Part and Inventory Search

Sponsor

Back
Top