Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
"Waiting for lock" message 2
- Thread starter admanri
- Start date
-
1
- #2
-
1
- #3
If in the Main.PRG, if you put the code....
SET MULTILOCKS ON
SET REPROCESS TO AUTOMATIC
The second user wanting to lock and do his locking will wait for the first user to unlock and then automatically continue his operation. But remember, bad coding.. to the effect that the second user is made to wait permanently as if the system hung up. Between the locking and unlocking, there should be no user interaction.
Hope this helps you.
ramani :-9
(Subramanian.G)
FoxAcc
ramani_g@yahoo.com
LET KNOW IF THIS HELPED. ENOUGH EXPERTS ARE HERE TO HELP YOU OUT! BEST OF LUCK
SET MULTILOCKS ON
SET REPROCESS TO AUTOMATIC
The second user wanting to lock and do his locking will wait for the first user to unlock and then automatically continue his operation. But remember, bad coding.. to the effect that the second user is made to wait permanently as if the system hung up. Between the locking and unlocking, there should be no user interaction.
Hope this helps you.
ramani :-9
(Subramanian.G)
FoxAcc
ramani_g@yahoo.com
LET KNOW IF THIS HELPED. ENOUGH EXPERTS ARE HERE TO HELP YOU OUT! BEST OF LUCK
- Status
Similar threads
- Locked
- Question
