"Source Priority" grayed out - ARCserve 11.1 sp1 Windows 1

[dsmith48]

I have a WIN2003 server with ARCserve 11.1 sp1 installed. This server is only backing up its own 4 drives. I would like to change the Source Priority (project data is on the last drive to be backed up), but the top, bottom, up, and down buttons are all greyed out. Is this due to some limitation or am I missing something? I also have ARCserve 11.1 for Novell loaded at another location where Source Priorities work correctly.

Any help is greatly appreciated.

Thanks

 

[vschumpy]

you can only set source priority at drive level if you make the machine a half green checkbox. So unselect and reselect something and if you're using DR remember to set the checkboxes in global options so that your DR information is updated. Re-submit the job and you should be able to set source priority then.