LanAdminGeek
IS-IT--Management
Anyone know how to update the Server list in device manager so it only shows active servers. I have servers in that list that have been shutdown 2 years ago.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
"BrightStor Backup Servers" list in Device Manager 1
- Thread starter LanAdminGeek
- Start date
- Status
- Thread starter
- #3
LanAdminGeek
IS-IT--Management
Discovery service is running. Tried running discover now with no luck. Is it safe to just clean old servers from the discovery table in the registry?
-
1
- #4
speshalyst
IS-IT--Management
HI,
Yes. You can delete the entried for the OLD server from the registry.
Also if you have multuple ARCserve servers where the entries are up to date, you can export the discovery table from a properly working server to the problem serer using the dsconfig.
So it Shall be Written!
So it Shall be Done!!
Yes. You can delete the entried for the OLD server from the registry.
Also if you have multuple ARCserve servers where the entries are up to date, you can export the discovery table from a properly working server to the problem serer using the dsconfig.
So it Shall be Written!
So it Shall be Done!!
- Status
Similar threads
- Locked
- Question