Just activated QSIG trunks to Cisco 8.0. has some issues originally but name display, clid, seems to work fine.We are having some issues doing tandem trunking , not getting ringback or not hearing ringback to some locations.Tracing calls and activating dchannel lookup, seems to indicate calls established.I am sending calls over network via location codes, not cdp...I programmed rdb from documentation from cisco, left out some prompts that I normally activate when doing inter trunking on routes...any ideas, like I said works ok to some sites not others..
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
QSIG trunking
- Thread starter gaibut
- Start date
Similar threads
- Locked
- Question