QSIG and Centalised Intuity LX

[JZon]

Has anyone been lucky implementing QSIG and Centralised Intuity LX.
We have multiple locations on CSI's between two locations we have the voicemail up and running. Only thing is that the MWI is not working and when dialing into the Audix remotely we have to punch in our extension.
This is between two CSI's running on R111.03.0.526.5.

Have seen posts about this on the past only saw that the answers were missing..

Hope that there is anybody out there that can help us..

Kind regards,

John

 

[phon3guy]

John,
Did ytou ever get anywhere with this problem. I am having the same issue between an 8700 CM2.2 and a G3V10 linked via Q-sig. The lights do actually trunk on after the 8700 goes through its maintanence each evening, but that is the only time the lights state changes. These message waiting lights make me crazy!