Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Qos for Polycom?

Status
Not open for further replies.

Prizmm

Instructor
Joined
Mar 8, 2004
Messages
124
Location
US
Anyone have any good info on setting up QOS for our polycom units (Video Conferencing? We are running a full Cisco core with a Sonicwall edge. Thanks
 
Hi,

Does the SonicWall preserve Diffserv or DSCP values? We use Polycom and Netscreen with DSCP values. On your Switch, you could use:

config t
int gix/x
mls qos cos 5
priority-queue out

Once done, you can test and capture the data to check the flags. Hope this helps.

Rgds,

John
 
thanks, ill give that a whirl. Im a bit confused on QOS. Do I want to set it on the Polycom itself, the switch it links thru, and our Firewall/Router? Thanks
 
Hi,

You would want to configure QoS end to end.

Rgds,

John
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top