copperhead
Technical User
Received message of "Protocol to remote tape server botched (in rmtgets)" while doing a ufsdump. Any ideas where to start looking for the problem. Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Protocol to remote tape server botched (in rmtgets)
- Thread starter copperhead
- Start date
- Status
- Thread starter
- #3
copperhead
Technical User
Both boxes are using solaris. It recognizes and will work when referencing the tape server name on the internal network but not the name or ip address of the tape server on our main net. Both the ip and name for the main net tape server as well as the address and name for the internal network are listed in the hosts and .rhosts file. One gets through the other doesn't.
Thanks
Thanks
- Status
Similar threads
- Locked
- Question