Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Programming Software 1

Status
Not open for further replies.

smoknonions

Programmer
May 12, 2004
38
US
Where can you get a copy of the programmming software for the Panasonic switches. I have checked the website with no luck. Thanks!!
 
you have to be a certified dealer to access that area of the site!
 
KXTDA30 New system. Unable to log on
I am using Maintenance console Programme Ver 1.0
Anyone know why I cannot log onto this switch via USB or RS232.
Power up/Initialise, ok. Test Extn in port #01 = ok.
Red Alarm Led = PG.
Try and connect via USB.....error message:
System data version error(pls update the system data by latest version main program).

Also I canot enter programming via serial port. This just times out. (connections are ok with a null modem in line.


 
are you a certified or legit dealer of the tda series?
 
the version of the software you are using is two old for that system contact your supplier he will give you a new ver if you have cert....
 
SW simply too old. Ask your distributer for Panasonic Download site details
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top