Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Programming code for IP Phones
- Thread starter collinsw
- Start date
yes it is.......in regards to the stations themselves. but there is a little bit more involved depending on what you want to do down the road
BoBAz
8700/8500/8300/G350/Ip Office/SG203/SG5x//G3r/G3SI/Audix/ Manager/VMM/8500
BoBAz
8700/8500/8300/G350/Ip Office/SG203/SG5x//G3r/G3SI/Audix/ Manager/VMM/8500
As stated the stations themselves are very similar in the programming method...Buttons ext etc.
The big difference is that with hardphones you will also need to configure some settings via a TFTP file server or an HTTP fileserver as part of the firmware package that each phone must use to function properly.
This is discussed in depth in the Avaya Lan Administrator Guide or in the 46xx manuals.
Not difficult just different then TDM based equipment in that respect.
The big difference is that with hardphones you will also need to configure some settings via a TFTP file server or an HTTP fileserver as part of the firmware package that each phone must use to function properly.
This is discussed in depth in the Avaya Lan Administrator Guide or in the 46xx manuals.
Not difficult just different then TDM based equipment in that respect.
- Status
Similar threads
- Locked
- Question
- Locked
- Question