I have a jetway motherboard and it will only take a 600 Intel Celeron i have now a Intel Pentium 2 400 can i just put the processor in or will i have to change the jumper settings and change the settings in the Bios. Also if i get a 900 celeron will it still work or will it damage my motherboard. I Know it will only run at 600 but this is the only celeron i can get my hands on at the moment.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Processor
- Thread starter CDFREEK
- Start date
You should go to the jetway's webpage:
Get the latest manual for your board and perhapse grab a bios-update from there.
The update could perhapse enable the use of a faster CPU. (> 600 MHz)
In the manual you should find the jumper-settings you are looking for. (I think changing the setting will be necessary) patrick.metz@epost.de
Get the latest manual for your board and perhapse grab a bios-update from there.
The update could perhapse enable the use of a faster CPU. (> 600 MHz)
In the manual you should find the jumper-settings you are looking for. (I think changing the setting will be necessary) patrick.metz@epost.de
- Status
Similar threads
- Locked
- Question