Hi , I have a Cisco 4500 M routers I tried to upgrade it's IOS and in the mean time was playing with it's registers.. I must have put in the wrong value because when reloaded all i get is fÿÌ`fÿÌæ†fæ†f3f0Ìþ˜~3ø˜˜<3˜†žf<À†øæž`?þž <þžàž˜žøž > PLEASE PLEASE HELP. what can i reload or reset to get my router back.. Thanks SO much
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PROBLEM BOOTING get Garbage
- Thread starter Hezhaika
- Start date
CCIEWANNABE
MIS
Have you consdiering entering the Bootstrap Program?
Send a break sequence to the console as the router starts the boot process and the router drops into ROMMON.
link:
In ROMMON, boot directly to an image on bootflash.
Set the configuration register to 0x0 by entering the following: o/r 0x0. This will reset the configuration to defaults.
You can also try to reseat (remove and then reinsert) SIMM memory. Route once; switch many
Send a break sequence to the console as the router starts the boot process and the router drops into ROMMON.
link:
In ROMMON, boot directly to an image on bootflash.
Set the configuration register to 0x0 by entering the following: o/r 0x0. This will reset the configuration to defaults.
You can also try to reseat (remove and then reinsert) SIMM memory. Route once; switch many
- Status
