Problem Asterisk Elastix with 9608 IP PHONE

[drigo]

hi all,



I would AVAYA 9608 phones connected to Asterisk Elastix 1.6-12 server but I can not.
I did an update and SIP phones when I enter an extension to connect to the server I receive an error message "Acquiring Service".
when I searched, a problem with the TCP, UDP, or TLS.

my config Elastix:

Extension: 4000
Display Name: Stantard


This device uses sip technology.

secret: 4000
dtmfmode: rfc2833
canreinvite: no
context: from-internal
host: dynamic
type: friend
nat: yes
Port: 5060
Qualify: yes
callgroup
pickupgroup
disallow: all
allow: ulaw
dial: SIP/4000
accountcode
Mailbox: 4000 @ device
deny: 0.0.0.0/0.0.0.0
allowed: 0.0.0.0/0.0.0.0



my config IP:


ADDR

use DHCP: no
Phone: 192.168.0.88
Router: 192.168.0.65
Mask: 255.255.255.0
http Server: 192.168.0.126
DNS Server: 192.168.0.65
802.1Q: Auto
Vlan ID: 0
Vlan Test: 60
Host to ping:

SIP

SIP global settings

sip domain: 192.168.0.126
Avaya environnement: no
Reg. Policy: simultaneous
Failback Policy: auto
CFG Srvr: 192.168.0.126
User ID Field: no
Host to ping:


SIP Proxy Server

192.168.0.126

Press select

SIP Proxy Server: 192.168.0.126
Transport Type: UDP
SIP Port:5060


thank you for help

 

[intrigrant]

Avaya phones are build and intended for Avaya systems, they cannot be used on other systems. Therefore you need "open" SIP devices as SNOM or Polycom.
However the same applies to Cisco phones and there are nerds building home brew firmware which allows you to use these phones on Asterisk type of system.
My advice to you is to search the uncountable Asterisk forums, blogs etc. and maybe there is a nerd interested to help you with it.

Good luck.

A simple mind delivers great solutions