Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PrntScr from Delphi vs MS Paint (which bypasses some thing)

Status
Not open for further replies.

ronkq

Programmer
Jul 10, 2010
13
US
...have a piece of Delphi (6,7,2010) code which does a screen capture to the Windows Clipboard, and prints a single sheet of the screen (1024x768) on any printer.
Problem: takes too long to get started printing vs MS Paint, which prints immediately.
How to achieve same thing in Delphi/PascaL.
Examination of the print queue - if using Delphi/ Windows normal print entry point; then the print queue fills with 50+ MB of data; if using MS Paint then the print queue fills with about 0.6MB. The Delphi program delivers about 0.7MB of data, but Windows blows it up to 50+MB depending on the printer. Applies to Win XP... Win 7.
What gives?.. What does MS Paint bypass, so that we can bypass that too?
Hope somebody can help.
Thank you for all efforts,
RonQ
 
You would do better to place this request here:

forum102

It is not possible for anyone to acknowledge truth when their salary depends on them not doing it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top