Private line forwarding to vmail box

[flingarrows]

What am i missing? i have a pvr key, that appears on several phones (none on key 0). It is marp'd to a set that has forwarding/hunting to call pilot (marp is on in cfn). I have toggled the CMR prompt form yes, to no, and back. No change. I have fnad fnat fnal set to fdn in the rdr block. this is on a 3.0 61. i have put in the most recent deplist from nortels site. NTP's give no other indication of what i need to do to make this work

any ideas?

 

[johnpoole]

sure, add it to an analog set or make it key 1 somewhere.. if a number is not either key 0 or analog, marp does not control.. it does not have to be marped on key 0, marp will still control if marp is turned on

john poole
bellsouth business
columbia,sc

 

[flingarrows]

cool, thanks John

 

[GHTROUT]

Ahhh, not that easy. A PVR in it's native programming won't FNA... but this method will solve it: faq798-6453



GHTROUT.com | FAQs | Recent Replies

 

[johnpoole]

works on the pvr on my station gh, i had to add it as an analog to get it to go to mail

john poole
bellsouth business
columbia,sc

 

[flingarrows]

i could get it to work with the analog, must be something different in my cdb, but i did get it to work with the hot keys

 

[GHTROUT]

Interesting JP. I admit, I didn't try an appearance on an analog...but it was because the books say "FDN is always inhibited in Private Lines”

Now I see why you followed up to the initial post I made a few weeks ago about my HOT work-around.

I’ll see if it applies to my 25.40 system as soon as I can. …the books are just books. The system is a living entity that can’t read books







GHTROUT.com | FAQs | Recent Replies