Print Pick up Groups? 2

[NARSBARS]

Is there any way to print pick up groups in DN or pickup order, all at one time?

NARSBARS

 

[srmega41]

I believe if you use the Feature list in LD 81, and select PUA as the feature, you will get all the phones that have PUA in their Class of Service, listed by Pick-Up Group.

You can even select a range of RNPG after the feature option, so you could print 1 group or groups 5 through 10.

Scott M.

 

[zog99]

To print existing ringing number pick up groups:

LD 81
REQ LST
CUST 0
DATE (C/R)
PAGE (C/R)
DES (C/R)
FEAT RNP
RNPG X
(X = Pick Up Group Number or Carriage return (Enter) to print all Groups)

 

[NARSBARS]

srmega41,
The tip on printing a range is great! I was printing all and they were coming out in TN order. I sent you a Star.

NARSBARS

 

[johnpoole]

if you return after the second feature prompt you will list all of them, then save that to a txt and open with excel. makes a decent tool

REQ   lst
CUST  0
DATE
PAGE
DES
FEAT  pua
RNPG  
FEAT

john poole
bellsouth business
columbia,sc

 

[NARSBARS]

johnpoole,
I will give that a try immediately. As I am printing out groups I am getting blank DNs but hte DN is programmed to be in the group. Any ideas? I edited the fields a little so they would appear ok in this format.

00 4464 0015 TN 048 0 08 04
00 4456 0015 TN 048 0 10 07
00 4469 0016 TN 008 0 00 02
00 4475 0016 TN 008 0 08 02
00 4471 0016 TN 008 0 12 15
00 4476 0016 TN 008 0 14 01
00 0016 TN 024 0 01 11
00 0016 TN 024 0 11 11
00 4468 0016 TN 024 0 13 05
00 4455 0016 TN 024 0 13 11
00 4477 0016 TN 032 0 03 10
00 4473 0016 TN 032 0 06 02


NARSBARS

 

[johnpoole]

if you place code brackets around those post, the format will clean itself up.. the blank dn's are sets with more them one marped line.. bad news is you'll need to print the tn's to locate those sets.. good news is you can copy from an excel and paste direct to a procomm screen

john poole
bellsouth business
columbia,sc

 

[NARSBARS]

johnpoole,
Great stuff as usual. I have had to give out two stars on this one.

How about a stumper?
Anyone know how to print out sets by TGAR?

NARSBARS

 

[mluckie1]

The blanks are when KEY 0 is not programmed. LD 81 always list value of key 0 with tn. Prt those tn's with no dn listed to see, may also be an ACD set.

 

[johnpoole]

in my switch key 0 is always programed, acd sets do not have pua or gpua. i still get banks when key 0 is marped on a different set

john poole
bellsouth business
columbia,sc

 

[NARSBARS]

Key 0 is programmed and in this switch I only use ACD for NCFW.
Thanks

NARSBARS