Print Disabled TN 2

[CyberWorld]

Hi Guys,

I would like to know if there is a command to print
out all Disabled TN in a Option 81 system.

Would be a great help.

Thank you in Advance

 

[mluckie1]

You will need all the loop numbers but go into ld 32 and use the command LDIS L S (L=loop S=shelf) hit return it will list all disabled card and unit numbers for that loop and shelf.

 

[CyberWorld]

Thank you mluckie1

Steve

 

[johnpoole]

something that i like to use is ld 117.. inv generate sets, then later inv prt sets..that shows not only disu but sets that are not plugged in.. i run that once a week, to make sure sets match the programming..

john poole
bellsouth business
columbia,sc

 

[mluckie1]

John, if you go into LD 30 and enter the command "LOOP ALL" and press return the system will do a loop test on all loops. Anything that doesn't work or isn't plugged in, digital sets, will prt an error code with either the TN or the L S C. You can also use the LOOP L and it will only test the loop that you specify. This used to be in mids until rls 15 when it was removed because it disabled sets that were there. This trouble has been resolved.

 

[johnpoole]

didn't know that was back in, i use inv mostly for users that have moved their own phones.. sorta the phone cops, i don't let users gen trouble.. i find one or two a week that did a upgrade without calling in for the change...bob's leaving, i'll just use his display...when i find them i do a disu, they call in a trouble, a day or two later, i'll enlu and idu, if their not change back, i go change them back...

john poole
bellsouth business
columbia,sc