PRI Question

[Multitech]

I have a client that has a MICS 0 X 32, 6.0 with 1 PRI card and 1 CLID card, in the MICS. The problem is each morning they can,t call out on the PRI, when a number is dialed it will go back to the time & date in the display, like nothing ever happen. Now When a call comes in from the outside on a target line, that line works, calls can be made out on the line, like it reset or turned something on. Each morning it starts all over again. Is there a setting I'm missing? Thanks

 

[PERRYPJ]

TROUBLE IS IN CENTRAL OFFICE, THEY NEED TO CHANGE A PARAMETER IN SOFTWARE. IT'S GOT TO DO WITH THE BCH BEING TESTED. I LAY MONEY ON THE FACT THAT ITS AN ESS5 OFFICE

OLD ROLMEN WORKING ON NORTELS

 

[Multitech]

Thanks PERRYPJ, I'll look into that.

 

[MarvO1]

I lay my money on PERRYPJ being absolutely right about the ESS5.

MarvO said it

 

[Multitech]

So it's an ESS5. What should I tell Telco about the ESS5 or what to do on the ESS5, to make the PRI work? Thanks.